Replacement Of The Battery Pack - Goobay 55488 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 17
User manual
Fig. 6: Operating
Figure
Tab. 4: Selection of the desired mode.
7

Replacement of the battery pack

1. Loosen the fixing screws on the wall.
2.
Remove the product from its attachment to the wall.
3.
Loosen the screws of the battery compartment on the back of the
product.
4.
Carefully open the battery compartment.
5.
Disconnect the rechargeable battery pack plug from the connector
socket.
6.
Remove the rechargeable battery pack from the battery compartment.
7.
Replace the battery pack with the same type.
13
Function
1
ON/OFF
2
The light is automatically swit-
ched on at dusk and lights up
with 20% of the maximum power.
3
The light shines at full power
after being triggered by a
movement in the detection area
of ≤ 8m.
After 20 seconds without move-
ment, performance is reduced
permanently to 3 % until new
motion detection.
4
The light shines at full power
after being triggered by a
movement in the detection area
of ≤ 8m.
After 30 seconds without move-
ment, the light switches off until
movement is detected again.

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

55489

Table des Matières