LENCO ClassicPhono TCD-2570 Mode D'emploi page 9

SETTING THE DISPLAY MENU LANGUAGE
Operation
1. Switch ON the POWER ON/OFF BUTTON (15). The Display (18) will light up.
2. Press the MENU BUTTON (19) to select FM or DAB. Turn the TUNING/ENTER KNOB (21) to select
"SYSTEM", then press confirm.
3. Turn the TUNING/ENTER KNOB (21) to select LANGUAGE, then press the TUNING/ENTER KNOB (21)
to confirm.
4. Turn the TUNING/ENTER KNOB (21) to select the desired languages, then press the same
TUNING/ENTER KNOB (21) to confirm.
SETTING THE DISPLAY TIME AND DATE
Operation
1. Switch ON the POWER ON/OFF BUTTON (15). The Display (18) will light up.
2. Press the MENU BUTTON (19) and turn the TUNING/ENTER KNOB (21) to select SYSTEM".
3. Turn the TUNING/ENTER KNOB (21) to select TIME, then press the TUNING/ENTER KNOB (21) to
confirm.
4. Turn the TUNING/ENTER KNOB (21) and select SET 12/24 HOURS. Press the TUNING/ENTER KNOB
(21) to confirm.
5. Repeat the above operation 2-4 and select one of the following options: SET TIME/DATE or AUTO
UPDATE.
6. lf selected SET TIME/DATE, use the TUNING/ENTER KNOB (21) to set Hour & Minutes, then press the
TUNING/ENTER KNOB (21) to confirm the operation.
7. To set the Auto-Updating, follow the above procedure 2-6 and select AUTO UPDATE. From this menu,
turn the TUNING/ENTER KNOB (21) to select one of the following options: FROM ANY/FROM
DAB/FROM FM/NO UPDATE.
9