LENCO ClassicPhono TCD-2570 Mode D'emploi page 12

PLAYING COMPACT DISC
To start
1. Press FUNCTION BUTTON (6) to select "CD" model.
2. Press "open/close" button (11) to open the CD door (10).
3. Place a CD with the printed side facing up inside the tray & then close the CD door.
1. Focus search is performing, the first track will start playback.
2. To interrupt, press the STOP BUTTON (26) once, the total number of tracks appears on the led
display (18). Press again PLAY/PAUSE BUTTON (2) to resume normal playback.
Skip/search mode (skip/search up/skip/search down)
• During play or pause mode, if SKIP UP BUTTON (3) is pressed, it will go to next track and display the
track no. and then keep the play or pause mode.
• During play or pause mode, if SKIP DOWN BUTTON (4) is pressed, it will go back to the beginning of the
track, original track number is displayed and keep the play or pause mode.
• After step 2, press SKIP DOWN BUTTON (4) again will go to the previous track and keep the play or
pause mode.
• If press and hold the SKIP UP BUTTON (3)/SKIP DOWN BUTTON (4) during cd/mp3 playback the playing
track will go fast forward or backward until the button is released.
• To skip 10 tracks UP or DOWN press the TRACK +10 or TRACK -10 button on Remote Control
REPEAT/RANDOM MODE
Press the PLAY MODE BUTTON (5) to activate this function. All the tracks can be played in difference
mode as follow:
• Repeat play: you can listen the desired tracks or folder repeatedly by this function.
• Random play: you can listen all the tracks or folder in a random order by this function
CD DISC PROGRAMMING
Up to 99 tacks can be programmed for mp3 (20 in CD) and play in any order, before use, be sure the
system is at stop mode before programming:
1. In cd mode and stop the cd playback.
2. Press the PROGRAM BUTTON (46), "P" will appear on led display (18). Moreover, it will indicate
program no. and digits for track no. to be programmed.
3. Select a desired track by pressing SKIP UP/DOWN BUTTONS (3)/(4).
4. Press the PROGRAM BUTTON (46) to store the track into memory.
5. Repeat steps 3 and 4 to enter additional tracks into the memory if necessary.
6. When all the desired tracks have been programmed, press PLAY/PAUSE BUTTON (2) to play the disc
in assigned order.
7. To cancel the programmed file, press STOP BUTTON (26).
PLAYBACK OF MP3/WMA SONG VIA USB STORAGE MEDIA
The system is able to decode and playback all mp3/wma file which stored in the memory media with USB
connecting port.
1. Press FUNCTION BUTTON (6) to select "USB" mode.
2. Plug-in the USB plug with the face up & make sure the plug is completely going into the USB port.
3. The system will start reading the storage media automatically after connecting, and the LED display
(18) will show the total number of mp3/wma files
4. Repeat the same playback procedure as playing cd/mp3 disc as above
12