Agu SN10 Mode D'emploi page 73

MEDICATION CHAMBER INSTALLATION
ATTENTION
Please clean (rinse) the medication chamber before use.
Install the medication chamber properly as shown in the picture below.
1 Attach the medication chamber to the main unit until click.
2 Install the panel into the main unit.
ATTENTION
• Make sure that the medication chamber is properly installed;
otherwise, it may cause a bad connection, and the nebulizer
may not work properly.
• Please keep electrode contacts of the main unit and the
medication chamber clean; otherwise, the nebulizer may
not work properly.
HOW TO TRANSPORT NEBULIZER
For proper transportation of the nebulizer you should remove the parts and follow the steps below.
1 Disassemble the nebulizer.
Remove the mouthpiece and the inhalation mask.
2 Install the protective cover.
Install the protective cover as shown in the picture. This will
protect the nebulizer from possible damage during transpor-
tation.
3 Place the main unit and parts in carrying/storage case.
ATTENTION
• Do not transport the nebulizer that still contains medication or water. Liquids may leak, and
the device may get dirty or be damaged.
• Do not store the nebulizer in a place with high temperature or humidity or in direct sunlight.
EN
2
1
73