Agu SN10 Mode D'emploi page 65

ATTENTION
Please make sure you press the button before you start to remove the medication chamber.
Please do not press the membrane with your finger or other objects to avoid tearing it.
Fill the chamber with medication:
1 Fill the chamber with medication as shown in the picture. Recommended filling volume: max. 6 ml /
min. 0.5 ml.
2 Close the lid of the medication chamber.
ATTENTION
• Make sure that the chamber lid is tightly closed to avoid leakage of medication from the chamber.
• Fill the chamber with medication when it is removed from the main unit.
Re-attach the medication chamber to the main unit:
1 Insert the medication chamber till it goes click.
2 Install the decorative panel.
3 Install the mask of a suitable size or the mouthpiece.
EN
1
max. 6 ml
min. 0,5 ml
2
1
2
3
65