Installation And Use Of The Software (Pro Kit) - Walter SURFOX Pro Kit Manuel De L'utilisateur

4

Installation and use of the software (Pro kit)

Installation and use of the software
(Pro kit)
1. Place the software CD (For Windows XP, VISTA and Windows 7X. A version
for Windows 2000 is also available upon request) supplied with the kit in
the CD reader of the computer. The auto run will then activate.
2. Unzip the ZD_2.6.42.03_Certified file and launch the installation of the
printer driver.
3. Select printer model GK420d.
4. Select the proper USB port (USB00X – X is the port number) or if you have
multiple USB ports, select the first one.
5. Launch the installation of ZebraDesignerv2 by double clicking on the
document from the CD. ZebraDesignerv2 is the program designed for
creating stencils' artworks.
6. Before launching ZebraDesigner for the first time, copy the Default Label file
from the CD to the path Document\My Labels\Labels. This default label has
the proper settings for your printer and stencil paper and is easy to use.
7. When starting the ZebraDesigner program for the first time, select the label
previously copied to the Default Label folder for a quick use of the labels with
proper settings. The Default Label can be edited (size and content) as many
times as desired and saved under different names (Make sure to keep the
extension file .ibi).
8. You may also prefer to create your own default label or change the
properties of the label every time you create a label. If this is the case,
ensure you respect the size of the stencil paper and keep the continuous
mode.
6