Altec Lansing PT8051 Mode D'emploi page 7

Typical Digital Connections
SATELLITE
OR
CABLE TV
TUNER
DVD
To connect a digital audio source:
• Use a coaxial cable to connect the COAXIAL IN (DVD) jack on the
PT8051 to the coaxial output jack on the DVD player.
• Use an optical cable to connect the OPTICAL IN (AUX) jack on the
PT8051 to the optical output jack on a digital audio source such as a
game console or digital video recorder.
• Use an optical cable to connect the OPTICAL IN (TV/SAT) jack on
the PT8051 to the optical output jack on the satellite tuner or cable
TV tuner.
Note: When connecting a DVD player we recommend using the coaxial
input found on the rear of the PT8051. However, if your DVD player
only has an optical output it can be connected to the AUX input.
Connecting Devices Equipped with an Analog Audio
Output (VCR or Similar Device)
To connect the PT8051 to a VCR or similar analog audio device, connect
the cables as shown in the diagram below.
Analog Audio Connections
SATELLITE
CABLE TV
TUNER
DVD
To connect audio from an analog (VCR, etc.) audio device:
• Use a standard stereo audio cable to connect the AUDIO IN (AUX)
jacks on the PT8051 to the audio output jacks on the VCR or similar
audio source. Ensure that the cables are connected correctly
observing left (white) and right (red) connections at both the PT8051
and the source device.
• Use a standard stereo audio cable to connect the AUDIO IN (TV/SAT)
jacks to the audio output jacks on the satellite TV or cable TV tuner.
If your satellite TV or cable TV tuner has a digital output this input
can be used for another device.
OPTICAL
GAME
CONSOLE
PT8051
OR
OPTICAL
L
VCR
R
AUDIO OUT
PT8051
• Use a standard stereo audio cable to connect the AUDIO IN (DVD)
jack to the audio output jack on the DVD player. If you have
connected your DVD player using an optical or coaxial digital cable
you can use this input for another device.
Video Connection
OPTICAL
To connect the video out:
• Using the supplied A/V cable, connect one yellow end to connect the
VIDEO OUT on the PT8051 and the other yellow end to the video
input jack on the TV. This connection allows you to view the on-
screen display (OSD) on your TV screen when the corresponding
input is selected.
Connecting a Subwoofer
To connect an optional subwoofer:
• Use an optional commercially available mono audio cable to connect
the SUBWOOFER OUT jack on the rear of the PT8051 to the
SUBWOOFER INPUT jack on the subwoofer.
7
TV
VIDEO IN
PT8051
POWERED
SUBWOOFER
AC IN
INPUT