Altec Lansing PT8051 Mode D'emploi page 10

EQ (Equalizer)
Use this function to select equalizer settings. Choose from CLASSIC,
POP, ROCK, or JAZZ. The default setting is CLASSIC.
OSD LANG
CENTER DELAY
REAR DELAY
TEST TONE
SCREEN SAVER
EQ
DEFAULTS
EXIT SETUP
Default Setting
If RESET is selected, all the items in the setup menu will be reset to the
factory default settings as previously indicated.
OSD LANG
CENTER DELAY
REAR DELAY
TEST TONE
EQ
DEFAULTS
EXIT SETUP
CLASSIC
POP
JAZZ
Operating the PT8051 Remote Control
In addition to controlling your PT8051 you can program the remote
control to operate audio/video components from other manufacturers.
Codes can be set up for each device to be controlled: TV, SAT/CAB,
AUDIO, DVD, and AUX.
1
2
4
1. STATUS
2. NUMERIC BUTTONS Use to enter preprogrammed remote codes
3. DEVICE BUTTONS
4. PROGRAM
10
3
Indicates operation of remote when specific
buttons are pressed. Illuminates continuously
to indicate remote is in program mode.
for other devices.
Use to program or switch remote modes
for operating other devices.
Use to enter program mode when
programming remote control codes for
other devices.