Diagnostics; Led Status Displays - Lenze 2102-V Série Instructions De Montage

8

Diagnostics

LED status displays

8 Diagnostics
LED status displays
Pos. Colour Status
0
Green
On
Off
Blinking
1
Yellow Blinking
2
Yellow Blinking
3
Red / On /
green blinking
82
Description
The communication module is supplied with voltage and has a
connection to the drive controller.
The communication module is not supplied with voltage. The
controller or the external voltage supply is switched off.
The communication module is supplied with voltage, but is not (yet)
connected to the controller because ...
l
the communication module has not been correctly attached to the
controller;
l
data transfer to/from the controller is not yet possible (e.g.
controller is in initialisation mode).
The controller receives a telegram.
The controller sends a telegram.
The red and green drive LEDs indicate the operating status of the 82XX,
8200 vector, 93XX, 9300 Servo PLC and Drive PLC standard device (see
operating instructions for the standard device).
l
EDKMF2102 DE/EN/FR 8.0