Lenze 2102-V Série Instructions De Montage page 64

6 Electrical installation
Voltage supply
Internal voltage supply
)
Note!
Internal voltage supply has been selected in the case of standard devices with
an extended AIF interface opening (e.g. front of 8200 vector). The area shown
on a grey background in the graphic marks the jumper position.
By default, this is not supplied internally in the standard device.
ƒ
For internal voltage supply place the jumper on the position indicated
ƒ
below.
In the case of all other device series (9300, ECS), voltage is always supplied
from the standard device.
Lenze setting
(Only external voltage supply possible.)
64
Internal voltage supply
l
EDKMF2102 DE/EN/FR 8.0