Settings - Goobay 44529 Mode D'emploi

User manual
1
4
Fig. 11: Installation
1.
2. Open the connection sleeve by turning it counter-clockwise until
3.
4. Slide the parts of the connection sleeve shown in Figs. 11 - 4
5. Screw the power cables as shown in Fig. 11 - 5 using a screw-
6. Close the connector by turning it clockwise, as shown in Figure
7

Settings

Only floodlights with motion sensor:
Fig. 12: Adjustments (Floodights with motion sensors)
SENS: SENS adjusts the range of the PIR sensor. This is a mini-
TIME: TIME sets the switch-off delay between min. 10 ± 5 s and
15
Turn off the fuse.
the connection block is released as shown in Fig. 11 - 1/2.
Insulate the cables as shown in Fig. 11 - 3.
over the connection cable.
driver.
11 - 6.
mum of 4 m, maximum of 10 m.
10 ± 2 minutes.
2
N
L
GND
5
6 mm 15 mm
3
6