MicroPower SMP 120/10 Mode D'emploi page 5

Safety
The charger is only intented for indoor use.
Follow the instructions for handling batteries provided by the battert manufacturer.
Only use spare parts recommended by the supplier.
ATTENTION!
Disconnect the battery and power supply before carrying out maintenance or cleaning
the charger.
Do not use charger if it is damage. Do not touch demaged components. Turn of the
mains voltage immediately and send for service personnel.
The charger has a voltage that can cause personal injury. Thus, the metal casing may
only be opened by authorised service personnel.
Installation
If several chargers are to be mounted next to each other, they may not be located so
that cooling air from one charger blows into the air intake of another charger.
Install the charger so gasses from the charging do not get sucked in by the chargers
fans.
9904111 Issue 4
User manual
Read through these user manual careefully before tou begin using the
charger. Store the user manual so that they are available for the person
using the charger.
Hydrogen gas is generated when charging batteries, which can
cause an explosion.
Batteries should only be charged in well-ventilated premises.
During charging, batteries may not be placed in vicinty of an
open fire or sparks.
The charger should be installed indoors in a space with a
vapour barrier.
5