Install The Upper Handle; Install The Grass Catcher; Install The Mulch Plug; Set The Cutting Height - GreenWorks LMF319 Manuel De L'utilisateur

6.3

INSTALL THE UPPER HANDLE

3
11 12
1. Align the holes in the upper handle (3) and the lower
handle (4).
2. Put the bolts (12) through the holes.
3. Tighten the knobs (11) onto the bolts (12).
4. Do the same operation on the other side.
6.4

INSTALL THE GRASS CATCHER

5
1. Remove the mulch plug.
2. Open the rear discharge door (5) and hold it.
3. Hold the the grass catcher (8) by its handle and engage
the hooks (13) on the door rod (14).
4. Close the rear discharge door.
12
11
4
13
14
English
6.5

INSTALL THE MULCH PLUG

1. Remove the grass catcher.
2. Open the rear discharge door (5) and hold it.
3. Hold the mulch plug (9) by its handle and fit it in the
discharge chute.
4. Close the rear discharge door (5).
6.6

SET THE CUTTING HEIGHT

The machine can be set to different cutting heights.
8
1. Pull the height adjustment lever rearward to increase the
cutting height.
2. Pull the height adjustment lever forward to decrease the
cutting height.
9
EN
5
9