Install The Lower Handle; Install The Upper Handle; Install The Battery Pack; Remove The Battery Pack - GreenWorks DT40L00 Manuel D'utilisation

7.2

INSTALL THE LOWER HANDLE

1. Insert the lower handle (4) into the housing holes.
2. Put screws (8) through the handle holes (7) to fix the
lower handle in position.
7.3

INSTALL THE UPPER HANDLE

1. Align the mounting holes in the upper handle (3) and
the lower handle (4).
2. Insert the bolts (10) and secure using the handle
knobs (9).
3. Repeat the same operation on the other side.
English
7.4

INSTALL THE BATTERY PACK

• If the battery pack or charger is damaged, replace
the battery pack or the charger.
• Stop the machine and wait until the engine stops
before you install or remove the battery pack.
• Read, know, and do the instructions in the battery
and charger manual.
1. Open the battery door (5).
2. Push the battery pack (11) into the battery
compartment until the battery pack locks into place.
3. When you hear a click, the battery pack is installed.
4. Close the battery door.
7.5

REMOVE THE BATTERY PACK

1. Open the battery door (5).
7
WARNING
EN