Setting The Clock; Setting The Timer - Indesit KN6I66A/FR Mode D'emploi

Planning cooking with the electronic
programmer*
GB

Setting the clock

After the appliance has been connected to the
power supply, or after a blackout, the display will
automatically reset to 0:00 and begin to blink. To set
the time:
1. Press the COOKING TIME button
COOKING END TIME
2. Within 4 seconds of having pressed these
buttons, set the exact time by pressing the + and -
buttons. The + button advances the hours and the -
button decreases the hours.
Once the time has been set, the programmer
automatically switches to manual mode.

Setting the timer

The timer enables a countdown to be set, when the
time has elapsed a buzzer sounds.
To set the timer proceed as follows:
1. press the TIMER button
N.
2. Press the + and - buttons to set the desired time.
3. When the buttons are released the timer begins
counting down and the current time appears on the
display.
R
4. After the time has elapsed a buzzer will sound,
and this can be switched off by pressing any button
(except the + and - buttons). The symbol
switch off.
! ! ! ! ! The timer does not switch the oven on or off.
Adjusting the volume of the buzzer
After selecting and confirming the clock settings,
use the - button to adjust the volume of the alarm
buzzer.
Setting the cooking time with a delayed start
First decide which cooking mode you wish to use
and set a suitable temperature using the SELECTOR
and THERMOSTAT knobs on the oven.
At this point it is possible to set the cooking time:
1. Press the COOKING TIME button
2. Within 4 seconds of having pressed this button,
set the desired amount of time by pressing the + and
- buttons. If, for example, you wish to set a cooking
time of 30 minutes, the display will show:
N
3. 4 seconds after the buttons are released, the
current time (for example 10.00) reappears on the
display with the symbol
26
and the
simultaneously.
. The display shows:
will
.
m m m m m
and the letter A (AUTO).
Next the desired cooking end time must be set:
4. Press the END COOKING TIME button
5. Within 4 seconds of having pressed this button,
adjust the cooking end time by pressing the + and -
buttons. If, for example, you want cooking to end at
13.00, the display shows:
O
6. 4 seconds after the buttons are released, the
current time (for example 10.00) reappears on the
display with the letter A (AUTO).
P
At this point, the oven is programmed to switch on
automatically at 12:30 and switch off after 30
minutes, at 13.00.
Setting the cooking time with an immediate start.
Follow the above procedure for setting the cooking
time (points 1-3).
! When the letter A appears, this indicates that both
the cooking time and the end cooking time have
been programmed in AUTO mode. To restore the
oven to manual operation, after each AUTO cooking
mode press the COOKING TIME
COOKING TIME buttons simultaneously.
! The symbol m m m m m
will remain lit, along with the oven,
for the entire duration of the cooking programme.
The set cooking duration can be displayed at any
time by pressing the COOKING TIME button
and the cooking end time may be displayed by
pressing the END COOKING TIME button
When the cooking time has elapsed a buzzer
sounds. To stop it, press any button apart from the
+ and - buttons.
Cancelling a previously set cooking programme
Press the COOKING TIME button
COOKING END TIME
Correcting or cancelling previously set data
The data entered can be changed at any time by
pressing the corresponding button (TIMER,
COOKING TIME or COOKING END TIME) and the +
or - button.
When the cooking time data is cancelled, the
cooking end time data is also cancelled
automatically, and vice versa.
If the oven has already been programmed, it will not
accept cooking end times which are before the start
of the programmed cooking process.
.
and END
,
.
and the
simultaneously.