Crane Lugs In The Ventilator Unit - Kemper Clean Air Tower Mode D'emploi

Notice
The operator may not move the entire filter system using the crane
eyelets on the suction component. The components must be removed
separately. Afterwards, they can once again be reassembled at the
new location.

5.2 Crane lugs in the ventilator unit

For transport of the ventilator component , a total of four crane eyelets (pos. 1) inside
the ventilator component are provided. When assembling the filter system the
components can also be separately transported to the required assembly location.
Serial No.: 150 2206
Technical modifications without previous notification and errors reserved.
KEMPER CleanAirTower Instruction manual - EN
Figure 7, Transport of the ventilator unit
- 60 - Rev.: 2
Status as of: 09/2015