Dmx Channels - LOTRONIC MY60-SPOT Manuel D'utilisation

Running Mode
In Running Mode, DMX, Auto, Sound and Slave mode is displayed. Choose the operating mode.
Programs
Run one of the 8 built-in programs in Master mode.
Settings
(1) Pan Rev: Inversion of the Pan-movement.
(2) Tilt Rev: Inversion of the Tilt -movement.
(3) Display Rev: Inversion of the display.
(4)Sensitivity: In Sound-controlled mode, adjust the sensitivity from 0 to100. The higher the value, the higher the
sensitivity.
(5) DMX Fail: If a problem occurs in DMX mode, you can select OFF or HOLD. In OFF position, the unit switches off if
a problem occurs. In HOLD position, it continues to work in the latest setting.
(6) Calibration: Allows to calibrate the unit.
(7) Factory Reset: Return to factory values. The default setting is NO.
(8) Reset Motor: If this function is selected, all motors reset to their original position.
System Info
Check the details of the Software version, operating mode, and DMX address value.

DMX CHANNELS

8 channel definition table
Channel DMX Value Function
1 000-255
2 000-255
3 000-255
4 000-255
0-9
5 10-250
251-255
6 000-255
0-10
11-20
21-40
41-50
51-70
71-80
81-100
7
101-110
111-130
131-150
151-160
161-170
171-180
181-255
8 0-229
©Copyright LOTRONIC 2017
Pan
Tilt
P/T Speed
Dimmer
Strobe open
Strobe from slow to fast
Strobe open
Focus
No function
White + Open
Auto play color + gobo 1
Auto play color + gobo 2
White + Gobo 3
White + prism + blank gobo
Auto play color + Prism + gobo 1 rotation
Auto play color + Prism + gobo 2 rotation
White + Prism + gobo 3 rotation
Auto play color + Gobo1 →Auto play color + Prism + gobo 1 rotation
Auto play color + Gobo2 →Auto play color + Prism + gobo 2 rotation
Auto play color + Gobo3 →Color change + Prism + gobo 3 rotation
Auto play color + Prism + gobo 3 rotation
Color 3 + Prism + gobo 3 rotation
No function
MY60-SPOT Page 6