Fixture Linking - LOTRONIC MY60-SPOT Manuel D'utilisation

Features
• 8 or 14 DMX channels
• 8 built-in programs
• DMX, sound, master-slave or auto operation
Motorized Focus
•
• 7-color wheel +white, rainbow effect
• 5 rotating gobo wheel + open
• Gobo shake
3-faced prism
•
Beam angle 13°
•
• Linear dimmer 0-100%
• Speed adjustable Pan & Tilt
• Oled screen
Powercon connectors
•
Specifications
Power supply ....................................................................................... AC100-240V 50/60Hz
Consumption .................................................................................................................. 90W
Light source ............................................................................................. 1 x 60W white LED
Pan/tilt ............................................................................ 540°/210° with speed adjustment
Strobe ......................................................................................................................... 0-23Hz
Dimensions ............................................................................................. 245 x 145 x 345mm
Weight ......................................................................................................................... 4.35kg
Mounting
ORIENTATION
This fixture may be mounted in any position
provided there is adequate room for ventilation.
RIGGING
The LED moving head provides a unique mounting
bracket assembly that integrates the bottom of
the base, the included 'omega bracket' and the
safety cable rigging point in one unit (see the
illustration on the right).When mounting this
fixture on a truss, be sure to use an appropriate
clamp with the included omega bracket using a
M10 screw fitted through the center hole of the
'omega bracket'. As an added safety measure, be
sure to attach at least one properly rated safety
cable to the fixture using one of the safety cable
rigging points integrated in the base assembly.
SETUP
Disconnect the power cord before replacing a fuse and always replace with the same type fuse.

Fixture Linking

You will need a serial data link to run light shows of one or more fixtures using a DMX-512 controller or to run
synchronized shows on two or more fixtures set to a master/slave operating mode. The combined number of
©Copyright LOTRONIC 2017 MY60-SPOT Page 3