ShelterLogic SUPERMAX 12x26 Guide D'instructions page 6

3. ASSEMBlE lEGS & ATTACH TO ROOF FRAME
A. Rotate the foot until the
hole aligns with the hole in
the pole leg.
B. Insert a long pin (10052)
into each hole to secure
each foot. Secure with
ring.
C. Attach all legs to one side
first. Let the other side
of roof frame rest on the
ground.
D. Repeat for opposite side.
4. SECURE MIDDlE lEGS
On the 6 middle legs only, rotate the
legs, if necessary, to align the holes
at the top of the leg with the hole
at the bottom of each of the 4-way
connectors. Insert short pins (10051)
through this hole and secure with
rings.
5. ANCHOR CANOPY
A. Select a hole in each base foot.
B. Insert an anchor (10431) into the ground at an angle until the round head is touching the base foot. Insert
one anchor into each foot.
This is a temporary spike anchor. Not intended for permanent use.
A
C
Middle
Legs
A
Page 6
B
D
B
Leg Pole Assembly
800243
10093
10050
05_25770_0E