Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
1. See figure B1 , insert 2 global wheels into the front bottom holes.
2. See figure B2, insert 2 straight wheels into the holes under rear bottom.
3. See figure B3, insert 4 rubber pads into the holes at the bottom of base tray.
4. Unfolding of the walker :
As shown in figure B5, pull the top tray like the arrow shows, the walker is fully opened
when you hear a click.
5. See figure B6 , insert handle into the 2 holes, the handle is fully installed when you hear a
click.
6. Assembly of the backrest:
Insert the two pins on both side of the backrest as the arrow shown, and press down, the
backrest is firmly assembled when you hear a click ( see figure B7 ).
7. Assembly of the fabric seat:
Insert all the pins into the holes on the upper tray, and then pull out the buckles at the
back through the holes on the upper tray according to figure B9. The fabric seat is fixed
completely ( see figure B10).
INSTRUCTIONS
Publicité
Table des Matières
