Philips EasyLife FC8148 Mode D'emploi page 16

English
16
Cleaning the mini turbo brush
To clean the brush inside the mini turbo brush, follow the steps below.
1 Rotate the brush inside the mini turbo brush until the cutting groove
faces you. Use a pair of scissors to cut the hairs, threads etc that
have collected around the brush.
2 Remove fluff, hairs and other dirt from the brush.
replacement
The plug must be removed from the socket-outlet before cleaning or
maintaining the appliance.
Replacing filters
Replace the HEPA dust container filter and the HEPA exhaust filter every
12 months.
HEPA filters
- To remove the old filter and place the new filter, follow the instructions
for removing and placing the filters in chapter 'Cleaning and
maintenance'.
Ordering filters and accessories
- HEPA exhaust filters are available under type number FC8070.
- Dust container filters (HEPA and foam) are available under type
number FC8071.
storage
1 Switch off the appliance and remove the mains plug from the wall
socket.
2 Press the cord rewind button to rewind the cord.
3 Put the appliance in upright position. To attach the nozzle to the
appliance, insert the ridge on the nozzle into the storage slot.
Note: To ensure stable storage of the telescopic tube, adjust the tube to the
shortest length.
Environment
- Do not throw away the appliance with the normal household waste
at the end of its life, but hand it in at an official collection point for
recycling. By doing this, you help to preserve the environment.