Problems And Solutions - Vin sur Vin VSV50 Notice D'utilisation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

12° PROBLEMS AND SOLUTIONS
You can solve many simple problems with your wine cellar yourself, thus avoiding having to contact your after-
sales department. Try the following suggestions.
PROBLEM
The cellar will not start
The cellar does not cool sufficiently
The compressor starts and stops frequently
The light does not operate
Vibration
The cellar makes a lot of noise
The door does not close correctly
Error EE or EF
13° ENVIRONMENT
This product complies with EU WEEE Directive 2012/19/CE.
The crossed-out waste bin symbol on this appliance means that, at the end of its life, it should be recycled
separately from other domestic waste.
It should therefore be disposed of at a selective collection centre for electrical and or electronic appliances or, if
you are buying an equivalent product, by the retailer of the new product.
The user is responsible for taking the appliance to the appropriate collection centre at the end of its useful life.
Selective and appropriate collection for the recycling of no longer used appliances and their disposal and
destruction in an environmentally friendly manner, helps to prevent potential negative effects on the environment
and health, and encourages the recycling of materials used to make the product.
For more detailed information about available collection systems, contact your local waste collection organisation
or the retail outlet where you bought the appliance.
POSSIBLE CAUSES
The cellar is not plugged in.
The on/off button is in the off position.
The fuse in your electrical installation has blown.
Check the temperature selected.
The external temperature is beyond the cellar's operating
temperature.
The cellar is opened too often.
The door is not properly closed.
The door seal is not sealing correctly.
The external temperature is high.
A large quantity of bottles has been put into the cellar.
The cellar is opened frequently.
The door is not properly closed.
The cellar has not been correctly set.
The door seal is not sealing correctly.
The cellar is not plugged in.
The fuse in your electrical installation has blown.
The LED is not working.
The light switch is off.
Check and ensure that the cellar is level.
A noise resembling circulating water is produced by the
coolant gas and this is normal.
At the end of a cooling cycle, you can hear the noise of water
circulating.
Expansion and contraction of the internal walls may cause a
cracking sound.
The cellar is not level.
The cellar is not level.
The door seal is dirty or damaged.
The shelves are not positioned correctly.
A part of the contents is preventing the door from closing.
Contact your after sales department
32

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Vsv105Vsv120

Table des Matières