Vin sur Vin VSV50 Notice D'utilisation page 25

not overload the compartments of the appliance.
Caution! Cleaning and servicing
Before carrying out servicing, switch off the power supply and disconnect
•
the appliance.
When cleaning the appliance, do not use metal objects, steam systems,
•
volatile fluids, organic solvents or abrasive substances.
Do not use sharp or pointed objects to remove ice. Use a plastic scraper.
•
Important information concerning installation!
To ensure proper electrical connection, follow the recommendations given
•
in the present manual.
Unpack the appliance and visually check that it is not damaged. Do not
•
connect a damaged appliance. Inform your retailer or point of sale of any
damage. In such a case, keep the packaging.
It is recommended that the appliance be allowed to settle for at least
•
4 hours before connecting the electrical power supply, so that the
compressor fluid feed is correct.
Proper air circulation is necessary to avoid overheating. To ensure
•
sufficient ventilation, observe the installation recommendations provided.
In order to avoid fire risk, wherever possible, ensure that the appliance is
•
not in contact with walls or with any hot element (compressor, condenser).
Observe the installation recommendations.
The appliance should not be placed close to radiators or cooking hot plates
•
or gas rings.
Check that electrical sockets remain accessible when the appliance is
•
installed.
Power saving
To limit the electricity consumption of your appliance:
• Install it in an appropriate place (see "Installing your appliance").
• Leave the doors open as little time as possible.
25