Hardware Overview; Hardware Installation - D-Link DAP-2360 Guide D'installation

LAN - Solid light when the Ethernet port is connected
to a working port, such as a router or switch. The light
will blink when there is traffic through LAN port.
2.4 GHz - When lit, the access point is operating at
2.4GHz. This light will blink when there is wireless
traffic.
POWER - The light will blink during boot up. Once solid, the access point is ready.
* PoE kit (injector and adapter) is NOT include in the package and it can be purchased
with the model name "DPE-101GI".
2

2. Hardware Overview

3. Hardware Installation

12V
Power Receptor
(*Note no longer used,
replaced by PoE)
Antennas
RESET
1A LAN(PoE)
LAN Port (PoE)
Reset
D-Link DAP-2360 Quick Install Guide