Remote Control; Setting Up Your Receiver - Insignia NS-R5100 Guide De L'utilisateur

Remote control

PRESETS
Item Description
1 STANDBY button
2 SLEEP button
3 DIMMER button
4
VOLUME
5 MUTE button
6 CHANNEL LEVEL button
7 SETUP button
8 MEMORY/ENTER button
9
SELECT
10 Surround mode </> buttons
11
SELECT
12 Input selector buttons
13 TONE MODE button
14 SOUND PARAMETER button
15 STEREO button
16 TEST tone button
17
SELECT
18
SELECT
4
/ buttons
button
button
button
button
www.insignia-products.com
Insignia NS-R5100 AV Digital Home Theater Receiver
Item Description
19 DISPLAY button
20 DIGITAL INPUTS button
21 PRESETS SCAN button
22 Numeric keypad
23 POWER ON button

Setting up your receiver

Unpacking your receiver
Your box includes the following:
• One receiver
• One remote control with two batteries
• This User Guide
• AM and FM antennas
Warning
Do not plug the AC cord into the AC outlet until all
connections are completed.
Note
Be sure to observe the color coding when
connecting audio, video, and speaker cords.
Note
Make connections firmly and correctly. Failure to
do this can cause loss of sound, add noise to the
sound, or damage your receiver.
Locating your receiver
• Install your receiver on a stable flat surface.
Position your receiver so that it can have a
direct line of sight to the remote control.
• Do not expose your receiver to extremes of
temperature or humidity.
• Avoid placing your receiver on a hot surface
such as on top of other hot running
equipment. Make sure that there is adequate
ventilation to your receiver.
Caution
Do not install this receiver in a confined space such as a
bookcase.
Note
Connect the AC cord only after the speakers, antenna, and all
optional equipment have been connected. Never make or
change any connections with the power turned on.