Insignia NS-R5100 Guide De L'utilisateur page 12

4 Press an Input Selector button to select the
input source.
Note
Each time the VIDEO button is pressed, the input
source changes as follows:
• VIDEO1
• VIDEO2
• VIDEO3
Note
Each time the AUDIO button is pressed, the input
source changes as follows (when EXTERNAL IN
is selected as the input source):
• CD
• AUX
• TAPE
Note
Each time the FM/AM button is pressed, the band
changes as follows:
• FM ST
• FM MONO
• AM
Note
• If you press EXTERNAL IN on the receiver or
EXT IN on the remote control, EXT IN appears
on the display and six separate analog signals
from the component connected to this input
pass through the tone and volume circuits and
can be heard from the speakers.
• These analog signals can be heard only. They
cannot be recorded.
• To cancel this function, press a different input
source button.
10
OR
OR
www.insignia-products.com
Insignia NS-R5100 AV Digital Home Theater Receiver
5 If you selected CD, VIDEO1, or VIDEO2 as
the input source, you can press the DIGITAL
INPUTS button to select the digital or analog
audio input.
OR
Note
Each time the DIGITAL INPUTS button is
pressed, the audio input source changes as
follows:
• Optical1
• Coaxial1
• Coaxial2
• Analog
Notes
• When TUNER, AUX, TAPE, EXTERNAL IN, or
VIDEO3 is selected as an input source, the
analog input is selected automatically.
• If the selected digital input is not connected,
the DIGITAL indicator flickers and the analog
input is automatically selected.
• The selected digital or analog input is
automatically assigned to the corresponding
input source on the INPUT setup menu. For
more information, see "Modifying the input
settings" on page 18.
• The sound from the component connected to
the selected digital input can be heard
regardless of the selected input source.
6 Run the component for playback.
Note
When playing back a program source with
surround sound, refer to "Enjoying surround
sound" on page 12.