Keypad Deadbolt; Locking And Unlocking; Changing The Battery - Schlage BE365 Mode D'emploi

KEYPAD DEADBOLT

MODEL BE365

Locking and Unlocking

From the outside:
To Lock
1. Press the Schlage
button.*
* If the Turn Lock feature is disabled, a valid User
Code must be entered to lock the door. See Enable
or Disable Lock & Leave on page 12.

Changing the Battery

»
Replace the batteries in your lock at the same time each year that you test and replace the batteries in
your smoke alarms. This will ensure continued reliable operation. Use a high-quality alkaline 9 volt battery
for replacement.
1. Remove the inside cover.
Lithium Batteries?
Lithium batteries may have a longer life, but when they begin to fail, they fail quickly. We
don't recommend them because they don't give you a lot of time to change your batteries
6 6
before the lock is completely dead.
2. Rotate the thumbturn
away from the hinges.
2. Replace the battery.
To Unlock
»
If lighting is low, press the Schlage button to
illuminate the keypad before beginning.
1. Enter a User Code
into the keypad.
3. Re-tuck wires so they will
not be crimped. Replace the
cover.
2. Rotate the thumbturn
toward the hinges.