Functions; Auto Power Off (Sleep Mode); Change Thermocouple Type - Amprobe TMD90A Mode D'emploi

Read all Safety Information before using this
thermometer.

Functions

Auto Power Off (Sleep Mode)

The TMD90A shuts off automatically approximately 20 minutes after
being turned on. For recording or operating over longer periods of time
you can disable the sleep mode by pressing
simultaneously while powering on. When "n" then appears in the center
of the screen you can release the On button. Auto power off is disabled
when you turn off the meter.

Change Thermocouple Type

E
Press and
appears. Press the
(the default), J, T, R, S, and E types. The current mode is displayed on
the left side of the LCD. press
the screen.
WCaution
D
simultaneously for 2 or more seconds until K
C
button the type of probe cycles through K
E
D
, an "S" will appear in the center of
5
A
and