Keurig B60 Manuel D'utilisation page 11

c. After setting the desired Auto Off time, press
11
fig.
the Menu Button four times to scroll through
the remaining programming options and exit
the programming mode. "AUTO OFF SET" (fig.
11) will now be displayed to indicate that it has
READY
been set.
TO BREW
AUTO OFF SET
d. To cancel the Auto Off feature, press the
11 : 56
AM
Menu Button twice to reach the Auto Off
MENU
programming mode. Press and release the
Small Cup Button under the blinking "H"
to advance one hour at a time until "OFF"
is displayed.
3. Program your Brewer for a specific On/Off Time. NOTE: To use this
programming feature, the clock must be set to the correct time. The clock
will not be displayed unless the time is set.
a. After setting the correct time (required), press
12
fig.
the Menu Button three times to program the
On Time feature. The LCD Control Center will
show the programming options with a small
arrow next to "SET ON TIME" (fig. 12).
CLOCK
b. Press or hold the blue Small Cup Button under
AUTO OFF
SET ON TIME
BREW TEMP the "H" to scroll through the hours to your
11 : 56
AM
desired "ON TIME" hour.
PM
MENU
c. Press or hold the blue Large Mug Button under
the "M" to scroll through the minutes to your
desired "ON TIME" minutes.
d. After setting the desired time, press the Menu Button to save the "ON
TIME" and move to the "SET OFF TIME" (fig. 1).
e. If you want to set an "OFF TIME", repeat the
13
fig.
f. To complete the process, press the Menu
CLOCK
AUTO OFF
mode. The Control Center will now indicate the
SET OFF TIME
BREW TEMP
options you have set.
AM
PM
MENU
g. The On Time and Off Time functions operate
14
fig.
EXAMPLE :
6:15 AM and the Off Time for 10:00 PM, then the
READY
TO BREW
Brewer will be "READY TO BREW" and maintain
AUTO OFF SET
hot water in the tank during that time so that it is
ON TIME SET
11 : 56
AM
always ready for you to brew. If you wanted to
MENU
brew outside this window, simply press the Power
Button and you can brew as soon as the water is
heated and the "READY TO BREW" indicator is
displayed on the LCD Control Center.
NOTE : The "AUTO OFF" Timer and the On/Off Time programming options oper-
ate independently but can also be programmed to work together. For example, you
can set the On Time function to turn on at 7:00 AM and then set the Auto Off Timer
function to turn off the Brewer two hours after the last brew (fig. 14).
11
procedure above in steps b & c to set your
desired "OFF TIME".
Button two more times to exit the programming
independently from one another. To cancel
either set function, follow the steps above and
use the "H" and "M" buttons to advance to
12:00 AM. Make sure the M button is set to :00,
then change the "H" button. When you reach
12:00 AM, the Control Center will display "OFF"
and the function will be disabled.
If you chose to set the On Time at