Configuration - LENCO DIR-60 Mode D'emploi

8.

CONFIGURATION

Time Display Analog/digital
My MediaU When it is enabled, My mediaU will exist on the main menu. If various mediaU
accounts exist in the Radio, Select the default login account in here.
Network Wireless Network Configuration: Enable/disable WiFi network. When you
enable the WiFi network, the system will automatically select the required AP.
Enter WEP or WPA code to connect the WiFi.
Wireless Network (WPS PBC): If you are using a router with WPS/QSS button,
you may set up the network connection simple via WPS function. Enter it and
go to press the WPS/QSS button on your router within 120 seconds.
The connection between the router and Music Link will then be configured
automatically.
Manual Configuration: You can choose DHPC (which IP assigned automatically)
or manually input IP address for wireless network connection. When you select
manual setting for wired connection, the following have to be entered:
SSID (nameof access point), IP Address, subnet mask, default gateway,
preferred DNS server, alternate DNS server.
Check Network When Power On: Enable/disable WiFi network. When you
enable the WiFi network, the system will automatically search the available
AP. Select required AP.
Date & Time Setup the date and time
Set time format display as 12 Hour or 24 Hour
Set date format(YYYY/MM/DD-DD/MM/YYYY-MM/DD/YYYY)
Alarm There are three independent alarms-2 alarms of absolute time setting
(Alarm 1 and Alarm 2) and 1 alarm for relative time setting(Alarm NAP).
Note that the alarm source is from the preset Internet radio if Alarm Sound is
set to be Internet Radio. It can only set one same IR station for Alarm 1 and
Alarm 2. When the alarm is reached the unit connects to the Internet if the set
network is available. Therefore there may be some delay from the alarm to the
radio play. If no network is connection can be established within one minute,
the alarm will change to Melody automatically.
When Alarm "NAP" is set, it alarms once in 5/10/20/30/60/90/120 minutes
depending on which one you have set.
Choose Alarm Volume to configure the volume of the alarms.
Timer Scheduled Countdown timer (max. 100min)
playing When you choose on, you can set the scheduled playing time and frequency.
You cannot change station when you finished scheduled playing or setting will
be inactivated.
Language English/Deutsch/Espanol/Francais/Portugese/Nederlands/Italiano/Pyccknn/
Svenska/Norske/Dansk/Magyar/Cesky/Slovensky/Polski/Turkce/Suomi
Dimmer Power Saving/Turn On
Display color/monochrome
Power Mgmt Configure to go to standby mode automatically during in the menu or/and
without Wifi signal. Choose the power management timer (5/15/30mins) to
set the duration of the radio to switch standby mode automatically when you
are not controlling it. Choose Turn off to ignore the power management
function.
10