Husqvarna LC 247iX Manuel D'utilisation page 11

• Use this product to cut grass
lawns only. It is not permitted
to use it for other tasks.
• Use personal protective
equipment. Refer to
protective equipment on page
12 .
• Make sure that you know how
to stop the motor quickly in an
emergency.
• Do not operate the product in
rain or wet conditions. The risk
of electrical shock increases if
water enters the product.
• Do not operate the product
unless the blade and all
covers are attached correctly.
An incorrectly attached blade
can come loose and cause
personal injury.
• Make sure that the blade does
not hit objects such as stones
and roots. This can do
damage to the blade and bend
the motor shaft. A bent axle
causes heavy vibration and a
very high risk that the blade
becomes loose.
• If the blade hits an object or if
vibrations occur, stop the
product immediately. Stop the
motor, turn the safety key to 0
and remove the battery.
Examine the product for
damages. Repair damages or
890 - 002 - 21.12.2018
• Never attach the motor brake
Personal
• Put the product on a stable,
• Always stay behind the
• Let all the wheels stay on the
• Do not tilt the product when
• Be careful when you pull the
• Never lift up the product when
• Do not walk rearward when
• Stop the motor when you
• Do not run with the product
let an authorised service agent
do the repair.
handle permanently to the
handle when the motor is
started.
flat surface and start it. Make
sure that the blade does not
hit the ground or other objects.
product when you operate it.
ground and keep 2 hands on
the handle when you operate
the product. Keep your hands
and feet away from the
rotating blades.
the motor is started.
product rearward.
the motor is started. If you
must lift the product, first stop
the motor, turn the safety key
to 0 and remove the battery.
you operate the product.
move across areas without
grass, for example paths
made of gravel, stone and
asphalt.
when the motor is started.
11