ABB TWS/U 2.1 Instructions D'utilisation page 39

Mark „Active" and acknowledge. Time channel 1 is now active and exit
,
from the menu is automatic. The "Time channel 1" menu is displayed
again.
Change to the first time block and activate it.
Mark „Time block 1" and change to „Time block 1".
,
Mark "Status" of time block 1 and change to "Status".
,
Mark „Permanently active" and acknowledge. Time block 1.1 is now
,
permanently active and exit from the menu is automatic. The "Time
channel 1" menu is displayed again.
Programming the days Sat and Sun
Mark "Days" and change to "Days".
,
Press until "Sat-Sun" appears.
Press until "Sat-Sun" has a dark background. These weekdays are now
active.
If "Mon-Fri" have a dark background, press until "Mon-Fri" appears.
Press. The dark background of „Mon" to „Fri" disappears. The
weekdays are not active any more now.
Exit the menu. The days "Sat" and "Sun" are now activated for
switching processes in this time block.
15 ENG