Commissioning; Basic Settings By The Electrician; Installation/Connection - ABB TWS/U 2.1 Instructions D'utilisation

5

Commissioning

5.1

Basic settings by the electrician

The electrician uses default values for pre-setting the timer for the basic function
of control times.
The two timer time channels are now set set to the following possible basic
functions:
● „Up and down" for blinds control
● „On and Off" for switching processes
● 0% – 100% for dimmers
● "0 – 255" and/or "0% – 100%" for values
● „0 – 32" for light scenes
5.2

Installation/connection

7 ENG