Pur Line RAFY80 Mode D'emploi page 24

MED speed + SLEEP mode:
Press the SLEEP button when SPEED mode is MED to set SLEEP mode with MED wind
speed. Both MED and SLEEP indicators will be on. The wind speed will automatically
change as follows:
- First 0.5 hr: MED and LOW wind come out alternately every 10 sec.
-After 0.5 hr till power off: LOW speed wind comes out
LOW speed + SLEEP mode:
Press the SLEEP button when SPEED mode is LOW to set SLEEP mode with LOW
speed. Both LOW and SLEEP indicators will be on. LOW wind comes out 10 seconds and
stops 5 seconds alternately every 15 seconds until power off.
Note: To avoid overcooling, do not adjust the direction the wind to the human body.
HIGH speed+ NATURE mode:
Press the NATURE button when SPEED mode is HIGH to set NATURE mode with HIGH
speed. Both HIGH and NATURE indicators will be on. The wind speed will automatically
change with time as follows:
-HIGH speed 5 sec.  LOW speed 5 sec.  MED speed 5 sec.  stop 5 sec.  MED
speed 10 sec.  HIGH speed 10 sec.  MED speed 5 sec.  LOW speed 5 sec. 
stop 5 sec.  MED speed 5 sec.  HIGH speed 5 sec.  LOW speed 5 sec.  stop 5
sec. The unit will work circularly in the mode until power off.
MED speed + NATURE mode:
Press the NATURE button when SPEED mode is MED to set NATURE mode with MED
speed. Both MED and NATURE indicators will be on. The wind speed will automatically
change with time as follows:
-MED speed 5 sec.  LOW speed 5 sec.  MED speed 5 sec.  LOW 5 sec.  stop
5 sec.  MED speed 10 sec.  LOW speed 10 sec.  MED speed 5 sec.  LOW 5
sec.  stop 5 sec.  MED speed 5 sec.  LOW speed 5 sec.  stop 5 sec. The unit
will work circularly in the mode until power off.
LOW speed + NATURE mode:
Press the NATURE button when SPEED mode is LOW to set NATURE mode with LOW
speed. Both LOW and NATURE indicators will be on. The wind speed will automatically
change with time as follows:
-MED speed 5 sec.  LOW speed 15 sec.  MED speed 5 sec.  LOW 15 sec.  stop 5
sec.  MED speed 5 sec.  LOW speed 10 sec.  MED speed 5 sec.  LOW 10 sec.
 stop 5 sec.  MED speed 5 sec.  LOW speed 20 sec.  stop 5 sec. The unit will
work circularly in the mode until power off.
SPEED button
When the POWER button is pressed, HIGH speed indicator "HIGH" will be on and the
1.
strongest wind comes out.
Press the SPEED button once, the MED speed indicator "MED" will be on and the mild
2.
wind comes out.
Now Press the SPEED again, the LOW speed indicator "LOW" will be on and the weak
3.
wind comes out.
SWING button
Press the SWING button, the indicators will be on and the swinging wind comes out. It can
40