Quooker CUBE Manuel D'installation page 10

Enable Filter Status
en
Click the settings icon to the right of the CUBE home screen (fig. 1) then
navigate to "Settings" (fig. 2). Go to "Filter" and select "In" so that
there is a check mark next to it. After your approval, the counter will begin. The
filter status will now appear next to the CO ₂ cylinder status (fig. 3).
To check the status of the Filter, click the settings icon to the right of the
CUBE home screen (fig. 1) and navigate to "Filter". The display then shows how
saturated the filter is (fig. 3). When the filter needs to be replaced, the CUBE
shows a message on the display and will beep. You can then easily order a
new Filter using your account on quooker.com. Once you have replaced the
Filter, go to "Filter" on the display and click on it. The CUBE will then ask you if
you have replaced the Filter. After your approval, the counter will be restarted.
fig. 1
fig. 2
fig. 3