Husqvarna FS5000 D Manuel D'utilisation page 12

Blade guard
The blade guard is a protective cover for the top part of
the cutting blade. It gives protection if parts from a
damaged cutting blade or other objects eject in the
direction of the operator. The blade guard prevents
injury from the cutting blade. The blade guard is also a
part of the water cooling system that keeps the cutting
blade cool during operation.
To do a check of the blade guard
• Make sure that the blade guard is correctly installed.
To install a blade guard on page 18 .
Refer to
• Examine the blade guard for damages, such as
cracks.
• Replace a damaged blade guard.
• Replace the blade guard if it is hit, bent or has other
defects.
• Examine the blade guard lock for damages.
• Make sure that the blade guard lock is correctly
engaged.
Protective covers
Missing or damaged protective covers increase the risk
of injury on moving parts and hot surfaces.
12
To do a check of the protective covers
• Do a check of the protective covers before you
operate the product.
• Make sure that the protective covers are correctly
attached and do not have cracks or other damages.
• Replace damaged protective covers.
Muffler
The muffler keeps the noise levels to a minimum and
sends the exhaust fumes away from the operator.
1143 - 002 - 08.07.2019