BTI RS 1050 E Notice D'utilisation page 11

RECIPROCATING SAW
Congratulations!
You have chosen a BTI tool. Years of experience,
thorough product development and innovation make
BTI one of the most reliable partners for professional
power tool users.
Technical data
RS 1050 E/RS 1050 E BTI Box
Art. No
Type
Voltage
Power input
No-load speed
Stroke length
Cutting capacity in wood/
metal profi les/ plastic tubes
Weight
Level of sound pressure according to : EN 60745
L (sound pressure)
PA
K (sound pressure
PA
uncertainty)
L (sound power)
WA
K (sound power
WA
uncertainty)
Vibration total values (triax vector sum) determined
according to EN 60745:
Vibration emission value a
While cutting chipboard
a =
h,cw
Uncertainty K =
The vibration emission level given in this information
sheet has been measured in accordance with a
standardised test given in EN 60745 and may be used
to compare one tool with another. It may be used for a
preliminary assessment of exposure.
WARNING: The declared vibration emission
level represents the main applications of the
tool. However if the tool is used for different
applications, with different accessories or
poorly maintained, the vibration emission
may differ. This may signifi cantly increase the
exposure level over the total working period.
9 074 286/
9 074 287
5
V 230
W 1,050
0 - 2,800
mm 29
mm 265/130/160
kg 3.5
dB(A) 89
dB(A) 3
dB(A) 100
dB(A) 3
h
m/s² 14.9
m/s² 5.5
RS 1050 E/RS 1050 E BTI BOX
An estimation of the level of exposure to
vibration should also take into account the
times when the tool is switched off or when it
is running but not actually doing the job. This
may signifi cantly reduce the exposure level
over the total working period.
Identify additional safety measures to protect
the operator from the effects of vibration such
as: maintain the tool and the accessories, keep
the hands warm, organisation of work patterns.
Fuses:
Europe 230 V tools
Defi nitions: Safety Guidelines
The defi nitions below describe the level of severity for
each signal word. Please read the manual and pay
attention to these symbols.
DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in
death or serious injury.
WARNING: Indicates a potentially hazardous
situation which, if not avoided, could result in
death or serious injury.
CAUTION: Indicates a potentially hazardous
situation which, if not avoided, may result in
minor or moderate injury.
CAUTION: Used without the safety alert
symbol indicates a potentially hazardous
situation which, if not avoided, may result in
property damage.
Denotes risk of electric shock.
Denotes risk of fi re.
EC-Declaration of conformity
RS 1050 E/RS 1050 E BTI Box
BTI declares that these products described under
"technical data" have been designed in compliance with:
2006/42/EC, EN 60745-1, EN 60745-2-11.
These products also comply with Directive 2014/30/EU
and 2011/65/EC. For more information, please contact
BTI at the following address or refer to the back of the
manual.
11
E N G L I S H
10 Amperes, mains