Cleaning And Maintenance - ProfiCare PC-HR 3053 Mode D'emploi

English
46
1. Remove the protective cover.
2. Push the switch upwards. ON will be visible.
3. Hold the shaver at a right angle to your face.
4. Follow the outline of your face, and continue to hold the shaver at a right angle to your
skin. Small irregularities will be corrected by the flexible shaving foil.
Using the long hair cutting attachment:
Use the long hair cutting attachment to precisely cut the hair or beard.
• Pull the slide on the back of the shaver for the long-hair cutter to pop out.
• After shaving, manually close the long-hair cutter.
Stop operation
Stop operation by pushing the switch downwards. OFF will be visible.

Cleaning and Maintenance

WARNING:
• Disconnect the hand-held unit from the power supply before cleaning.
• Do not immerse the parts into water.
CAUTION:
• Do not use a wire brush or other abrasives.
• Do not use sharp or abrasive cleaning agents.
Shaving head with shaving blades
1. Switch of the shaver.
2. Press the shaving head button.
3. Clean the inside and the outside of the shaving head with the brush.
Cleaning the handset and the power cord
• You may wipe these parts with a damp cloth.
• Use slightly soapy water to remove spots.