Using The Smartclean System - Philips PT848 Mode D'emploi

4 Pull the seal off the cleaning cartridge.
5 Place the cleaning cartridge in the SmartClean system.
6 Push the top part of the SmartClean system back down ('click').

Using the SmartClean system

Always make sure to shake excess water off the shaver before you place
it in the SmartClean.
Note: If a lot of hairs have collected in the hair chamber, remove the hairs
before placing the shaver into the SmartClean. Open the shaving unit and
shake out excess hairs.
1 Press the top cap to be able to place the shaver in the holder
('click').
2 Hold the shaver upside down above the holder. Make sure the front
of the shaver points towards the SmartClean system.
ENGLISH
9