Philips PT848 Mode D'emploi page 13

B
A
Note: Do not clean more than one cutter and guard at a time, since they are
all matching sets. If you accidentally mix up the cutters and guards, it may take
several weeks before optimal shaving performance is restored.
Note: Make sure that the projections of the shaving heads it exactly into
the recesses.
A
B
5 Turn the lock anticlockwise (A) and remove the retaining frame (B).
6 Remove and clean one shaving head at a time.
Each shaving head consists of a cutter and a guard.
7 Remove the cutter from the shaving guard and clean it under the tap.
Then clean the inside and outside of the shaving guard under the tap.
8 Put the shaving heads back into the shaving unit.
9 Put the retaining frame back into the shaving unit (A) and turn the
lock clockwise (B).
ENGLISH
13