Bosch PTS 10 Notice Originale page 39

OBJ_BUCH-783-001.book Page 39 Thursday, July 3, 2008 12:02 PM
English | 39
Symbol Meaning
Observe the dimensions of the saw blade. The hole diameter
must match the tool spindle without play. Do not use reducers
or adapters.
When changing the saw blade, pay attention that the cutting
width is not smaller and the blade thickness is not larger than
the width of the riving knife.
Indicates the function of the locking knob on the angle stop
when adjusting mitre angles.
Indicates the possible positions of the parallel fence at the ta-
ble width enlargement.
The colour of the sticker corresponds with the scale colours on
the front guide rod. Depending on the position of the parallel
fence, the scale indicates the clearance to the saw blade.
160mm - 250mm
Delivery Scope
Bosch Power Tools 1 609 929 R65 | (7/3/08)