Functional Description - Makita GN900 Manuel D'instruction

SAVE THESE INSTRUCTIONS.
Tips for maintaining maximum battery life
1. Charge the
completely discharged.
Always stop tool operation and charge the
battery cartridge when you notice less tool
power.
2. Never recharge a fully charged
cartridge.
Overcharging shortens the battery service life.
3. Charge the battery cartridge with room
temperature at 10 ﾟ C - 40 ﾟ C (50 ﾟ F - 104 ﾟ F).
Let a hot battery cartridge cool down before
charging it.
Overview of the nailer
1
9
8
1. Battery cartridge
2. Fuel cover
3. Trigger
4. Indication lamp
5. Pusher lever
6. Pusher button
7. Magazine
8. Contact element
9. Hex wrench
009459

FUNCTIONAL DESCRIPTION

CAUTION:
Always be sure to remove the fuel cell, the battery
•
cartridge and nails before adjusting or checking
function on the tool.
battery cartridge
2
7
Installing or removing battery cartridge
before
battery
009441
Always switch off the tool before insertion or
•
removal of the battery cartridge.
To remove the battery cartridge, withdraw it from
•
the tool while pressing the button on the side of the
cartridge as shown in the figure.
3
009444
To insert the battery cartridge, hold it so that the
•
battery cartridge front shape fits to that of the battery
installment opening and slip it into place. Always
insert it all the way until it locks in place with a little
4
click. If not, it may accidentally fall out of the tool,
causing injury to you or someone around you.
6
Do not use force when inserting the battery
•
5
cartridge. If the cartridge does not slide in easily, it
is not being inserted correctly.
Fuel cell
Attaching the metering valve to the fuel cell
009445
Detach the cap (in case the metering valve is provided
with the cap).
6
1. Button
1
1. Metering valve
2. Cap
1
2