Cleaning and maintenance
after ironing
1
Set the on/off switch to 'O' (Fig. 8).
2
Remove the mains plug from the wall socket.
3
Put the iron on the iron stand, set the steam control to l (speciic types only) and let the
appliance cool down.
Iron
1
Clean the iron with a damp cloth.
2
Wipe scale and any other deposits off the soleplate with a damp cloth and a non-abrasive
(liquid) cleaner.
Never immerse the iron in water nor rinse it under the tap.
Steam tank
Rinse the steam tank once a month or after you have used the appliance approximately 10 times.
1
Carefully remove the steam tank cap (Fig. 6).
Let the appliance cool down suficiently before you remove the steam tank cap.
2
Rinse the steam tank with 500ml of fresh water.
3
Hold the steam tank upside down over the sink and pour out the water (Fig. 14).
4
Screw the steam tank cap back onto the steam tank.
Storage
1
Remove the mains plug from the wall socket and let the appliance cool down.
Make sure the appliance has cooled down suficiently before you put it away.
2
Empty the steam tank.
3
Regularly check if the mains cord and the supply hose are still undamaged and safe.
4
Speciic types only: For safe storage, lock the iron onto the stand with the iron lock slide.
First put down the tip (1) and then put down the heel (2) (Fig. 15).
5
Wind up the hose and cord separately.
6
Insert the hose and cord neatly in the cord storage compartment (Fig. 16).
Environment
-
Do not throw away the appliance with the normal household waste at the end of its life, but
hand it in at an oficial collection point for recycling. By doing this, you help to preserve the
environment (Fig. 17).
Guarantee & service
If you need service or information or if you have a problem, please visit the Philips website at
www.philips.com or contact the Philips Consumer Care Centre in your country (you ind its
phone number in the worldwide guarantee lealet). If there is no Consumer Care Centre in your
country, go to your local Philips dealer.
EnGlISh
11