Cleaning And Maintenance; After Ironing - Philips Azur GC4243 Mode D'emploi

Cleaning and maintenance

Using the calc-clean function
You can use the calc-clean function to remove scale and impurities.
Use the calc-clean function once every two weeks. If the water in
your area is very hard (i.e. when flakes come out from the
soleplate during ironing), the calc-clean function should be used
more frequently.
1 Set the steam control to position O.
2 Fill the water tank to the maximum level.
Do not put vinegar or other descaling agents in the water tank.
C
3 Select the maximum ironing temperature.
4 Put the plug in the wall socket.
5 Unplug the iron when the amber temperature pilot light has
gone out.
C
6 Hold the iron over the sink, press and hold the calc-clean
button and gently shake the iron to and fro.
Steam and boiling water will come out of the soleplate. Impurities and
B
flakes (if any) will be flushed out.
7 Release the calc-clean button as soon as all the water in the
tank has been used up.
Repeat the calc-clean process if the iron still contains a lot of impurities.
After the calc-clean process
- Put the plug in the wall socket and let the iron heat up to allow the
soleplate to dry.
- Unplug the iron when it has reached the set ironing temperature.
- Move the hot iron gently over a piece of used cloth to remove any
water stains that may have formed on the soleplate.
- Let the iron cool down before you store it.

After ironing

1 Remove the mains plug from the wall socket and let the iron
cool down.
2 Wipe flakes and any other deposits off the soleplate with a
damp cloth and a non-abrasive (liquid) cleaning agent.
ENGLISH
9