88
E
USING THE FLASH MODES
OK
This camera has four flash modes. Select the flash mode
according to the shooting conditions.
How to select the flash mode:
As you press the Flash mode button, the mode switches as
shown below. The selected flash mode is displayed on the
control panel.
Note:
When the Condition indicator LED is blinking, it means
the flash is being recharged. The shutter will not release
while the flash is recharging, so remove your finger from
the Shutter release button and wait for several seconds.
The Red-Eye Reducing Flash mode is not canceled when
the power is turned off. If any other mode is set, the
camera returns to the Auto-Flash mode.
(No icon) AUTO-FLASH mode
Automatically fires in low-light and backlight
conditions. (p. 90)
Significantly reduces the phenomenon of
"red-eye" (when a subject's eyes appear red in
flash photos). (p. 92)
The flash does not fire. (p. 94)
Fires regardless of available light. (p. 96)
RED-EYE REDUCING FLASH mode
OFF mode
FILL-IN FLASH mode