Table des Matières

Publicité

132
E
You can create popular 16-cut prints.
● Sticker prints can be made using the specialty paper (P-
60NS16U).
● In order to make sticker prints, the specialty paper must be
set in the P-300 printer's paper feeder.
5
1
Press the Function button in the Display mode to select
the Multi Print mode.
2
Select frames with the Previous (–)/Next (+) button and
press the OK button at each picture to be printed.
3
Enter the number of copies to be printed on the printer,
then press the DIRECT PRINT button to start printing.
● See page 128 for connection to the printer.
Note:
The Date-Print is not available in the Multi Print
mode.

MULTI PRINT

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

D-320lD-220l

Table des Matières