6- Electrical Connection; Electrical Safety - Vortice AIR-TEK PRO Série Notice D'emploi Et D'entretien

6. ELECTRICAL CONNECTION
The AIR-TEK PRO unit does not require any special wiring during setup. Plug the power lead (with adaptor) supplied
into a mains power socket. An ON/OFF switch is located on the control panel. (See the control manual attached to the
product for more information on operation).

6.1 ELECTRICAL SAFETY

ATTENTION: AIR-TEK PRO PRO is an electrical device and also has moving parts
(motor and impeller). For this reason, before carrying out any operation, maintenance
intervention or interaction with the equipment, it must be disconnected from the
electrical supply. The purpose is to avoid any electrocution danger or the user's limbs
entrapment.
32