4-Operation And Comissioning; Air-Tek Pro General Operation - Vortice AIR-TEK PRO Série Notice D'emploi Et D'entretien

4. OPERATION AND COMISSIONING

4.1 AIR-TEK PRO GENERAL OPERATION:

The AIR-TEK PRO has a simple and intuitive operation to facilitate users and installers operation and maintenance of
the unit.
In general, the AIR-TEK PRO intakes contaminated air from the two upper sides of the AIR-TEK PRO. Once the air is
cleaned and purified through the filters, it is delivered to the bottom of the unit and and returned to the room.(see Fig. 2)
To operate the AIR-TEK PRO, it first needs to be connected to the electrical supply (generally 230V / 50Hz but it can
also operate at 60Hz).
The AIR-TEK PRO is operated by means on the onboard control panel* that allows set up and control of the
following parameters:
1. On/Off of the air Purifier.
2. Automatic function – Autonomous.
3. Flow adjustment, 0 being the lowest and 100 the highest.
4. Schedule control for night mode optimization and thus favoring low energy consumption when the
interior spaces are empty.
5. Clogged filter alarm and maintenance indication. This alarm can be programmed for
hours of operation (See specific REG FILTER manual attached to the equipment).
*
For more details and the specific control operation, consult the REG FILTER manual enclosed with
the equipment.
Fig.2
28