Important Notes; Application; Technical Specifications - Franke AQCT0005 Notice De Montage Et De Mise En Service

4.

Important Notes

• Installation, commissioning and maintenance are to be performed only by a
qualified expert in accordance with the provided instructions, legal requirements,
and the recognised engineering standards.
• All technical connection regulations specified by the local water and electricity
supply companies must be observed.
• The battery compartment with battery or power supply with extension cable must
be ordered separately (see Accessories,
• All work must be carried out in a de-energised state.
• We reserve the right to make changes.
5.

Application

AQUACONTACT - a stainless steel shower panel for wall mounting with electronic
time control for battery or mains operation. For connection to premixed hot water or
cold water. 30 second flow time. With integrated hygiene flush (24h after last
actuation, for 10s). Functions which can be activated via reflection code on sensor:
Activation/deactivation of hygiene flush and cleaning switch-off (3 min.).
Additional functions via optional remote control
– Adjustment of flow and interval times for hygiene flush
– Switch from time control to body reflection, maximum flow time of 300 seconds
– Program-controlled thermal disinfection with safety switch-off
6.

Technical specifications

Minimum flow pressure:
Recommended flow
pressure:
Maximum operating
pressure:
Calculation of flow rate:
Volumetric flow:
Operating voltage:
Power consumption:
Degree of protection:
Chapter
1.0 bar
1-5 bar
10 bar
0.20 l/s
0.20 l/s at a flow pressure of 3 bar
6 V DC
1.5 W
IP 67
- 5 -
23).