Publicité
ASSEMBLY
2. Insert the seat support tube into the backrest tube until a "click"
3. Put on the seat cover to the seat frame.
4. Insert the steel wire through fabric sewing housing, put the two ends of the steel wire t into the plastic holes until sound
"click"
5. Fix the seat fabric onto the steel wire with the buttons.
6. Fix the backrest fabric onto the steel wire with the buttons.
7. Install the intermediate rail onto the back of front tray with 3 screws .
8. Install the font tray into the holes until a "click".
9. As below picture, take out the housing part and open the two legs until a "click".
10. Install the foot stand by insert the 2 foot stand into the housing & leg tube until a "click".
11. Install the hanging tubes: Consider the direction of the housing part put the hanging tube plastic inside.
12. Install the cross support tube: Install the cross tube by click onto the 2 hanging tubes.
13. Install the seat unit: Install the seat unit by insert the 2 hanging tubes into the seat socket until a "click".
14. Assemble the toy bar: put on the 3 toy bar arms onto the toy bar, and then put on the 3 plush toys into the holes of the arm.
15. Insert the toy bar frame into the toy bar hole according to the guide line, and then you can turn around the toy bar by 360
degree, you can stop in di erent position.
FUNCTIONS
16. Adjust the backrest positions: there are 3 positions of backrest position, adjust it by pulling handle of the backrest.
17. Folding: Folding the swing by pressing the 2 buttons in the front and back side on the 2 sides of the swing frame.
18. Press the lock button then the swing can stop swing. And release The lock button can make swing work normally.
19. To be bouncer: Release the seat unit from the hanging tubes, then the swing become a bouncer.
20. Release front tray: Release the front tray by press the 2 side buttons.
21. Adjust the positions of toy bar : The toy bar can be hand moved to di erent positions as you like, easy for parents to access
baby.
22. Install the battery of toy bar: Install 3pcs 1.5V AAA LR03 size batteries, and turn on the toy bar button, then
the toy bar can be turned around automatically, turn on the light button can open the lamp light.
OPERATION BOARD INSTRACTION
23. : 1.Power on/of ; 2.Speed button , 5 speeds, from slow to fast (press 5th speed and press again to stop)
3.Music button,12 songs. (press to start from 1st song, press again to move to next press longer for 3-5 seconds to stop)
4.Speed light; 5.Timer (15mins, 30mins, 60mins) ; 6.Nature song button ; 7 .Timer light ; 8.Remote control signal receiver
(selective) ; 9.battery door (need 4 SIZE AA battery)
REMOTE CONTROL FUNCTIONS (SELECTIVE):
24. 1. Power(press this button to close all functions ; 2.Speed button (5 speeds) ; 3. 3 timer buttons(15 minutes, 30 minutes, 60
minutes) ; 4. Music button 16 melodies, press the button to move to the next one; zz z.Bong volume decrease ; 6. Nature songs
button (5 nature songs , press the button to more to next one) 7. Song volume increase; 8. Button battery CR2025 3V
ENGLISH
Publicité
